Installing drawer slides requires some basic tools and skills. Here are some common installation steps:
Tool preparation:
Screwdriver or electric screwdriver
Tape measure
Pencil
Level
Installation steps:
Measure and mark
Measure the length of the drawer side.
Mark the installation position of the slide with a pencil on both sides of the drawer and inside the cabinet to ensure the height is consistent.
Installing the slide (drawer part)
Secure the removable part of the slide (usually the inner rail) to the side of the drawer.
Secure the slide with screws to ensure that the front and back are parallel.
Installing the slide (cabinet part)
Secure the other part of the slide to the inside of the cabinet.
Check that the slide is level with a level and then secure with screws.
Assembling the slide
Slide the drawer into the cabinet to ensure that the two parts of the slide are properly connected.
Gently push the drawer to check whether it slides smoothly.
Adjust and test
If it does not slide smoothly, check the alignment of the slide.
Adjust the screws to ensure that the slides are parallel and installed correctly
