The installation of slides da gaveta is very simple, but there are some details that need to be paid attention to, otherwise the Gavetas instalLED later canNãot be used Nãormally. Os slides de três seções que costumamos dizer são a mesma coisa. slides da gaveta can be divided into three parts: carris exteriores, carris médios, e carris interiores.
When installing the slide da gaveta, you need to remove the inner rail the main body of the slide da gaveta. O método de remoção também é muito simples. There is a spring clip on the back of the slide da gaveta. Basta pressionar levemente para remover o trilho interno. (Nãote that the middle rail and outer rail are Nãot removable and canNãot be removed by force)
Instale primeiro o trilho externo e o trilho médio da corrediça dividida em ambos os lados do corpo da gaveta, and then install the inner rail on the side panels of the drawer. If it is a finished piece of furniture, os furos no corpo da gaveta e painéis laterais da gaveta são pré-perfurados para fácil instalação, and you need to punch the holes yourself. (When installing the slide, it is recommended to assemble the drawer as a whole first. There are two holes on the track for adjusting the up and down and front and back distance of the drawer. At the same time, assegurar que as lâminas esquerda e direita estejam na mesma posição horizontal, and the difference canNãot be too large)
Em seguida, instale os trilhos internos e externos, and fix the inner rail to the length of the drawer Gabinete with screws at the measured position (Nãote that the inner rail and the already instalLED and fixed middle rail and outer rail should keep the same position)
Then align the inner rails on both sides of the fixed Gabinete with the slide rail interfaces instalLED on the drawer, e empurre duro para instalá-lo com sucesso (Nãote that if the middle rail and the outer rail are Nãot kept level on the left and right in the Anterior step, it will be stuck and canNãot be pushed in. At this time, either check the position of the outer rail or adjust the position of the inner rail to match the outer rail.)
